Tennessee Hunting Club Forums banner
1 - 1 of 1 Posts

701 Posts
Discussion Starter · #1 ·

Riflescope 1 Piece Mounts

Just thought we'd do a quick post with in stock 1 piece mounts.....

When a tough, reliable mounting system is required without adding substantial weight, the Nightforce Ultralite™ Unimount™/Magmount™ is the answer. It features a CNC machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws.

This unique design and construction provides the performance of steel at half the weight.

The Nightforce Unimount™/Magmount™ is designed to remain attached to the scope at all times, allowing quick removal and installation on different firearms.

Unimounts™ and Magmounts™ are available for 30 and 34mm riflescopes, and feature a 20 MOA taper (Magmounts are also available with a zero degree taper). The Unimount™/Magmount™ is the ultimate mount for attaching to weapons with an integral Mil. Std. 1913 flat top-type receiver.

Precise tolerances ensure that the riflescope is not subjected to stress, strain, or bending as the ring screws are tightened.

Nightforce X-Treme Duty Ultralite Unimount 1.5" Compact MAG 0 MOA 34mm

Nightforce Xtrm Ultralite Uni-Mount 1.5" 0 MOA 34mm - Titanium Alloy

Nightforce XTRM - Unimount™ 1.125" - 20 MOA - 30mm

Nightforce XTRM - Unimount™ 1.375" - 20 MOA - 30mm

Nightforce XTRM - Extended Unimount™ 1.375" - 20 MOA - 30mm

Nightforce XTRM - Unimount™ 1.5" - 20 MOA - 30mm

Nightforce XTRM - Unimount™ 1.5" - 0 MOA - 30mm

Athlon Cantilever mounts are made in the USA from High Strength Aluminum Alloy. Designed primarily for AR-15 and AR-10 rifles, these are also compatible on various MSR platforms.

A four screw ring cap design paired with a 2-nut base and recoil lug cross-bolts. A scalloped profile increases surface area while reducing mass, ensuring these rings will hold your scope tight!

Steel Recoil Lug: Machined into the cross-bolts, these ultra durable recoil lugs eliminate ring shift in picatinny and weaver cross slots.
4- Screw Cap Retention: The optimum balance of weight savings and retention.
Aircraft Grade Aluminum: Aircraft Grade Aluminum provide extra strength and durability to handle the toughest terrain and offers lifetime of use.
Scalloped Design: Increased area across the flex point of the rings increases mating surface contact ensuring a no-slip lap free design.
Hard Anodized Finish: Hard anodizing increases the rings durability and wear resistance. While producing a glare free matte finish.

Athlon Cantilever Mount 30mm 0 MOA

Athlon Cantilever Mount 30mm 20 MOA

Athlon Cantilever Mount 34mm 20 MOA

Burris AR-P.E.P.R. Mount 34mm w/ Picatinny Rail & Smooth Ring Tops

Burris AR-Signature QD P.E.P.R. Mount - 34mm

The new streamlined design with QD mount insures ¼ MOA re-mount capability and allows for use of back up iron sights while maintaining proper eye-relief. Available in 30, 34 and 35-mm options with Burris’ Signature polymer ring inserts, it provides adjustment from 5 to 40 MOA without using windage/elevation knobs.

Steiner P-Series Mount - 34mm
New lightweight design
Available for 30mm and 34mm tubes
Mounts to any picatinny style rail
Places your optic at the ideal height

Check out our new Just Arrived Section and our Latest Sales Flyer

We appreciate all the orders and support. Please stay well and safe.

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

Have a great day & please follow us on Instagram at gr8fuldoug1 :)

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

720 Old Bethpage Road
Old Bethpage, NY 11804
Please visit our web site @ www.cameralandny.com
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.